జర్నల్ ఆఫ్ సివిల్ అండ్ ఎన్విరాన్‌మెంటల్ ఇంజినీరింగ్

Residual Life Assessment of EOT Crane

Abstract

Sumit Guha

Loads and working conditions of the cross-section of 36 m span crane beam can be analyzed by finite element method. Firstly, analysis of the stress and deformation is completed under the dangerous condition of crane beam based on the ANSYS software; secondly, found out the stress concentration and fatigue crack sensitive area of the bearing; finally, captured the position of fatigue crack. All these methods can provide strong basis for implementing effective monitoring to the state of the crane beam stress. Thus, ensure safe operation of equipment and improve equipment utilization rate in work